All Hardware and Installation Instructions Included!
The Tekonsha Prodigy P2 electric trailer brake controller is a small device with a big responsibility. As one of the most popular and most trusted brake controllers on the market, this proportional brake controller utilizes primary sensor technology to provide a smooth braking response in any stopping situation. The Prodigy P2 has an easy-to-use knob so you can effortlessly set the power output to your desired braking power, a boost feature that lets you apply up to three levels of additional braking power, especially when hauling heavier loads, the choice of electric or electric over hydraulic braking, and manual override to help you brake safely when an unexpected stop pops up. The P2 also has an LED digital display so you can monitor your settings and trailer braking activity and a power-save mode to reduce battery drain when not in use. This intuitive brake controller can easily be positioned on top of or under the dash, with your choice of a mounting bracket or mounting pocket and is self-leveling when mounted within a 90-degree vertical range, so theres no need to adjust the unit once its installed. When youre done towing, the P2s snap-in dash mounting clip, Plug & Play port for two plug adapters, and removeable electrical connector allow the unit to be quickly stored. The Prodigy P2 truly is a complete trailer brake controller kit. It works with trailers with 1-4 axles, comes with all the mounting hardware needed for installation, and is backed by a limited lifetime warranty.
Features & Benefits
Plug & Play Adaper Included
Reverse battery protection for both vehicle and breakaway
Designed to work with electric over hydraulic brake systems
Numerous mounting options - including 360 degree vertical rotation
Digital display depicts voltage delivery to trailer during braking
No level adjustment necessary - it adjusts itself to varying terrain as you drive
Great for backing into tough spots! Works proportionally in reverse with the ability to disable when not needed
Produces stops that are in proportion to vehicles deceleration rate
"Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers
Continual diagnostics check for proper connection, shorted magnet conditions and much more
Quick and easy disconnect feature allows user to remove and store the control when not in use
Electric trailer brake control for up to 4 braking axles
Limited lifetime warranty
Brake Controller Wiring
Tekonsha trailer brake controller harnesses exist to make connecting your brake controller to your vehicle as easy as possible. These custom two-plug units are specifically designed to be used with any Tekonsha brake controller. The Plug & Play feature on the Tekonsha wiring harnesses makes them easy to install. Simply plug one end of the harness into the back of your desired Tekonsha brake controller and the other end into the port in your vehicle. No cutting, splicing, or taping required.
Each wiring harness is made up of four copper wires wrapped with a braided nylon thread to insulate the wires and protect them against nicks, punctures, and elevated temperatures. The four-pin Plug & Play connectors on each end of the harness are uniquely designed, with one end to fit each vehicle based on make and model year specifications, while the other end plugs easily into any Tekonsha brake controller.
Features & Benefits
VERSATILE: This brake controller wiring kit works with every activation type whether it be proportional or time-based brake controllers?in the Tekonsha line
PROTECTED WIRING: The four copper wires in each harness are covered with a braided mesh to give a factory-installed look. The covering also provides protection from damage like nicks and punctures, keeping the harness wires safe from elevated temperatures and potential shorts.
EASY INSTALLATION: Tekonshas Plug & Play design lets you use the wiring harness to easily connect your brake controller to your vehicle, no cutting, splicing, or taping required. Simply follow the detailed vehicle specific instructions included with your product to install.
CUSTOM DESIGN: Tekonsha trailer brake controller harnesses are designed to make connecting your brake controller to your vehicle quick and easy. These harnesses fit into any Tekonsha brake controller with a Plug & Play port. The other end fits into the factory plug in your vehicle.
We typically ship items within 24 hours of the order date excluding weekends.
Delivery Estimates
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page. Typical delivery times are 1-5 business days, freight items may take longer. We ship from several warehouses throughout the US to provide fast delivery.